Q Light Controller Plus 4.14.1 Kinora Kinora pxnode LED Bar (Pixels) Shutter Open Closed Strobe slow to fast, 1 - 20 Hz Pulse: ramp up, snap off, 0.5 - 5 Hz Pulse: snap on, ramp down, 0.5 - 5 Hz Random strobe slow to fast, 1 - 20 Hz Open Intensity Effect off (background color only) Effect level / FX color mix 0 - 100 % Effect Sine wave Gauss (random bumps) Triangle wave Tan wave (sharp peaks) Square wave (hard on / off) Random levels Twinkle (fading sparks, scale = density) Fire (one flame per cycle) Rainbow (FX dimmer = mix over background) Noise (smooth clouds) Bounce (bump going back and forth) Lightning (1 - 3 flashes per strike) Drops (dots spreading out while fading) Segment flash (random segments on / off) Glitter (FX color flicks, scale = density) Ocean (waves of three lengths) Rain (falling drops with a tail) Plasma (interfering waves) No effect (background color only) Speed Frozen Slow to fast (0.02 - 4.9 cycles/s, x2 every 32 steps) Effect Whole rig as one (twinkle, glitter: sparsest) Groups chained A to D: 1/16 cycle to 1 cycle per group Per group, all groups identical: 1 cycle (wave, segment, flame) per group to 2 pixels per cycle Per group: 2 pixels per cycle Per pixel drift, every pixel independent at 255 (twinkle, glitter: all lit at 255) Dimmer Red Green Blue Dimmer Red Green Blue White Dimmer Shutter Red Green Blue FX Dimmer FX Macro FX Speed FX Scale FX Red FX Green FX Blue Dimmer Shutter Red Green Blue FX Dimmer FX Macro FX Speed FX Scale FX Red FX Green FX Blue White FX White